Design Files and Case Required hardware

Note: if you purchased a case from compression, all required hardware is included in your shipment.

For all design files, visit the (4c) GitHub repo, and go to Releases.

Required hardware for building both halves and travel case:

  • (8x) M2x4 machine screw
  • (4x) M2x6 machine screw
  • (12x) M2x3.5x3 brass threaded heat-set inserts
  • (44x) 4x2mm neodymium disk magnets
  • super glue (cyanoacrylate glue)
Back to blog